Blog

You can technically put a coating over some tile, but you should not, and a reputable installer will pull the tile up first. Coating over tile traps every problem underneath it: grout lines telegraph through the finish, any loose or hollow tiles break the bond, and moisture and movement have nowhere to go. The result

Polished concrete works well in living spaces, and it is not as cold or unforgiving as its reputation suggests. Like tile or natural stone, it can feel cool and firm underfoot, but area rugs, radiant floor heating, and smart room layout address both concerns, and concrete actually holds warmth well once a room is heated.

Floor demolition generally runs a per-square-foot range that depends on what is being removed. Carpet is usually the least costly to pull up, tile and old coatings cost more because of the thinset or bond left stuck to the slab, and glued-down materials add grinding time on top of the tear-out. As a rough guide

Epoxy floor removal in the Portland and Vancouver area typically runs a general range of about $2 to $5 or more per square foot, and where your project lands depends on a few key factors: how thick and well bonded the coating is, the size of the floor, the condition of the slab, and how

The best way to remove epoxy from a garage floor is usually mechanical diamond grinding. This process removes the existing coating and prepares the concrete for a new flooring system. Other methods, including shot blasting, chemical stripping, and scraping, may work depending on the coating’s condition and thickness. Removing old epoxy can be difficult, especially

Looking for professional garage floor coatings in Tualatin, OR? Complete Coatings NW installs durable polyurea and polyaspartic floor coatings that transform bare, stained, or worn-out concrete into a beautiful, easy-to-clean surface. Our professionally installed garage floor coatings are designed to handle daily vehicle traffic, oil spills, moisture, and everyday wear. With most standard residential installations